Quad HD

4x more vivid than HD resolution, 1440P (2560×1440) QHD captures every little detail you may have missed before.

Front and rear full HD recordings

The Q800 Pro’s Image Sensors allow constant front 2K QHD resolution recording during both daytime and nighttime along with a 140-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.

Super night vision 2.0

DASH CAM videos recorded in a low-light environment, such as dark alleys or parking lots, may not be clearly identifiable. SUPER NIGHT VISION 2.0 in the Q800 PRO uses Image Signal Processing (ISP) technology to record a clear, visible video in any situation- while driving or parked.

Sony Exmor R Starvis image sensor

Perfect image processing even in low-light environments.

The Sony Exmor R STARVIS Image Sensor applied to the Q800 PRO provides rich colours and the optimal resolution. STARVIS technology improves Exmor R’s low light sensitivity by providing optimal image quality in visible ray and near-infrared range, allowing clear imaging in low light environments.

Energy saving parking recording

Energy saving parking recording will reduce power consumption by 1/3 less and gives 3x longer video recording than normal parking mode. When you are away for a vacation or leaving your car for quite some time, energy saving parking recording is a recommended solution. When in use, Q800 PRO will go to sleep and soon after an impact has been detection by built-in G-senor, Q800 PRO will wake up within a second and start recording for the next 20 seconds of the period.

Driving impact notification

In the event of a crash, the alert feature can help the driver to notify others of an emergency situation when the driver is not in the condition to do so. The family or the owner of the car can then remotely check on the situation from their location. When the car experiences an impact with a g-force level greater than 3g or 4g while driving, the dash cam will automatically send a push notification alert of the impact to the user’s smartphone logged in to the THINKWARE CLOUD app. A 20 seconds video of the incident (10 seconds before and after the incident) is also saved on the THINKWARE CLOUD server, and a push notification alert of the video is sent to the user, which can be checked later and downloaded from the app.

Safety camera alert

The THINKWARE DASH CAM Q800 PRO’s internal GPS provides accurate location information while the Safety Camera Alert function is on continuous alert to warn the driver of red lights and traffic enforcement cameras.

-RED LIGHT WARNING SYSTEM

-SPEED CAMERA WARNING SYSTEM

-RED LIGHT & SPEED CAMERA WARNING SYSTEM

-AVERAGE SPEED WARNING SYSTEM

-MOBILE ZONE WARNING SYSTEM

-ROAD SAFETY WARNING SYSTEM

The THINKWARE DASH CAM Q800 PRO is equipped with the Lane Departure Warning System (LDWS), Front Collision Warning System (FCWS), Urban Front Collision Warning System(uFCWS) and Front Vehicle Departure Warning (FVDW) to ensure driver safety with a voice warning.

Video enhancement technology

THINKWARE DASH CAMs are equipped with top-notch video enhancement technology on the market, ensuring the most vivid video recordings under any circumstance.

Wide dynamic range

When you are driving under bright sunlight, coming out of a tunnel, or getting under the shadow of a tall building etc, a sudden change in frontal light exposure levels can result in excessively bright or dark recordings. The WDR function eliminates excessively bright spots on the recording to correct its colour balance in order to ensure a clear image.

Night time picture quality correction

Images from the videos recorded during nighttime driving on dark streets are generally difficult to make out. The enhancement Sensors of THINKWARE DASH CAMs come with a standard function of brightness and colour control as well as noise cancellation.

Check recorded images and update firmware using a smartphone

Your smartphone and the Q800 PRO can be connected via the exclusive application ‘THINKWARE DASH CAM Mobile Viewer for Q800 PRO’ with built-in Wi-Fi in the navigation. Check, download or delete recorded images, update firmware or update safe driving information on the application.

✔Dash Cam                       
✔12V Power Cable
✔MicroSD Card - 32GB      
✔USB MicroSD Card Reader
✔Windshield Mount           
✔Spare 3M Mounting Tapes
✔Adhesive Cable Clips       
✔Quick Start Guide

iVolt mini external battery

Increase the duration of the Parking Surveillance mode of your THINKWARE Dash Cam with the iVolt Mini External Battery. It allows dash cam to remain in Parking mode for up to 20 hours, or 16 hours with a rear cam added. The battery is also fully recharged in 45 minutes while driving.

*iVolt Hardwired battery installation can incur additional charge depending on location needed to be fitted.



We recommend that you have your installation carried out by a qualified car audio and security installer. Our experienced installation team can take care of all kind of car audio and security installations.

• Car Stereo
• Andriod Screens
• Apple Carplay / Andriod Auto Integration
• Multimedia Audio Visual (Sat/Navs, Headrest Screens, Roof Screens etc.)
• Speakers/ Subwoofers / Amplifiers
• OEM Adapters Installation (DAB, iPod, iPhone, USB, Bluetooth, Aux)
• Dash Cameras
• Bluetooth Hands Free Car Kit Installation
• Vehicle Alarm Systems
• Vehicle Tracking Systems
• Vehicle Immobilisers
• Reversing Camera / Parking Sensors